Callaway X Hot Driver Loft Adjustments

Callaway Club Specialist, Ross Stewart shows you how to adjust loft and lie angle on the new X2 Hot Driver. Here is how you can adjust loft and lie angle on your X2 Hot Driver: Loft and Lie Adjustability Instructions We recommend that you make adjustments in the order below: 1.

LOFT options • stated loft (S) • stated plus one degree (+1) • stated plus two degrees (+2) • stated minus one degree (-1) The loft lets you adjust launch angle and backspin to influence trajectory. The club comes set in the stated “S” position.

To change the loft, loosen the screw at the bottom of the shaft and rotate both cogs until the loft setting you want is aligned with the white hash mark on the shaft and the white hash mark on the driver hosel assembly. Tighten the screw until you hear a click. Note: Your desired loft may appear on the upper or lower cog, depending on loft and lie angle combination. LIE options • Neutral (N) • Draw (D) Once the loft has been determined, hold that cog in place while you rotate the other cog between Draw “D” and Neutral “N”. This will change the lie angle and influence the starting direction of your shots.

Aug 20, 2013. Other than the lower loft, the Pro LD has the same tech specs as the regular Callaway XHot–a Speed Frame chassis, Hyperbolic Face and two. After a small adjustment in my stance and ball position, I was quite surprised at not only the heap of forgiveness the Pro LD has over other long drive drivers I've. Feb 27, 2014. Is Callaway's new X2 Hot driver really hotter than the previous X Hot? - GolfMagic is the world's fastest growing. The loft of the driver can be adjusted 2-degree up or 1-degree down and you can also set the club to neutral or draw to make the lie angle more upright. Changing the driver's loft will change the.

If you want to minimize a slice or enhance a draw, rotate the lie cog to the Draw “D” position, which will make the lie angle more upright. If you want to work the ball both ways, for either a fade or a draw, rotate the cog to the “N” position. Remember that this designation could appear on the upper or lower cog, and make sure the desired setting is aligned with the white hash mark on the shaft. Always tighten the screw until you hear a click. The figure below illustrates the do’s and don’ts for adjusting your hosel settings: Here’s an example: To adjust your 10.5° clubhead to 11.5 degrees of Loft and a Neutral position: • Find “ +1 ” on one of the two cogs and line it up with the hash marks on the shaft and clubhead hosel. • On the other cog, find the “N” setting and align it with the two hash marks.

• Tighten screw until you hear a click.

XHotDR.jpg __X Hot driver__Callaway has engineered a new cupface design on the X Hot drivers that combines the technologies of its VFT and Hyperbolic to optimize the stress and stiffness distribution across the face to improve ballspeed. According to Callaway's engineers, face thicknesses have been modeled to the ten-thousandth of an inch to assess the ideal variation of face thickness. The X Hot drivers, which come in four lofts (9.5, 10.5, 11.5 and 13) in the standard version and three lofts in the Pro version (8.5, 9.5, 10.5), also look to boost speed in other ways. The X Hot utilizes a longer, lighter shaft (46 inches and sub-60 grams), while the X Hot Pro features a more compact 440 cubic centimeter size to better match the playability preferences of better players. Both models also specifically tailor face curvature changes to better match the typical impacts for players typically using a certain loft. For instance, the bulge radius increases on both the X Hot and X Hot Pro by a half-inch as the lofts increase. Gears Of War 3 Pepakura Files For Mac.

In addition, the degree of draw bias on the X Hot increases as the loft increases. Both the X Hot and X Hot Pro also feature the three-way, face angle adjustability introduced last year in Callaway's RAZR Fit driver (Open, Square and Closed).

The X Hot Pro's three face angles are a half-degree more open than those settings on the X Hot. Available in stores by mid-February, both drivers will sell for $300. XHotFW.jpg __X Hot____fairway wood__Although Callaway has been standing on the sideline in the race toward more driver like face flexibility in fairway woods, it is looking to get back in the game with a new high-strength steel alloy cupface on its fairway woods that according to Callaway testing is at the U.S.

Golf Association limit for spring-like effect. The Carpenter 455 forged cupface design is 40 percent thinner than Callaway's RAZR X Black fairway design from last year. According to Callaway, the new face measures as thin as less than.047 inches, or about as thin as a dime. In addition to the face design, Callaway engineers reconfigured the internal weighting of the sole through a wave-shaped pad that projects one-quarter inch closer to the face to push the center of gravity slightly forward and low for lower spin. The X Hot comes in 3-wood through 11-wood lofts (15, 17, 19, 21, 23 and 25 degrees) with a 55-58-gram Project X Velocity shaft, while the X Hot Pro is available in four lofts (13.5, 15, 17 and 19 degrees) with a 70-75-gram Project X Velocity shaft. The X Hot shaft lengths are a half-inch longer than the corresponding loft in the X Hot Pro, and the X Hot Pro's lie angles are two degrees flatter than the corresponding loft in the X Hot. Both clubs will be available at retail in mid-February at a price of $230.