If you have a PC using UEFI (Unified Extensible Firmware Interface), you can use these steps to properly create a bootable USB media to install Windows 10. When you're getting ready to install a new release of, or you're planning to set up a, you first need to create a bootable USB media to start the setup and proceed with the installation. However, if you have a newer device that uses UEFI mode, instead of the legacy BIOS (Basic Input/Output System) firmware, you need to make sure the installation media includes the correct firmware support. Thankfully, you have multiple choices to get this done properly. You can use the Microsoft Media Creation Tool, which makes it easy to prepare a removable drive with support for both firmware modes (BIOS and UEFI). And if the tool doesn't work, it's also possible to use the popular Rufus tool to create a bootable media specifically to work on UEFI devices.
In this, we'll walk you through the steps to create a USB bootable media with UEFI support using the Media Creation Tool and Rufus. Here's how to install Windows 10 from USB. • • How to create a USB bootable media using Media Creation Tool You can use the Microsoft Media Creation Tool to quickly create a USB media that will boot on a device using UEFI. • Double-click the MediaCreationTool.exe file to launch the tool. • Click Accept. • Select the Create installation media (USB flash drive, DVD, or ISO file) for another PC option.
Mayuri Telugu Songs Download 2015. • The language, architecture, and edition will be selected automatically based on your computer configuration, but you can clear the Use the recommended options for this PC option to select the appropriate settings if you're trying to use the media on another device. • Click Next. • Select the USB flash drive option. • Click Next.
Create Windows 7 Bootable USB Install Disk. Create Windows 7 Bootable USB Drive From ISO File. Create Windows 7 Bootable USB Drive From ISO File & Installation.
• Select the removable drive from the list. • Click Next. After completing the steps, the Media Creation Tool will download the files to install Windows 10, and it'll proceed to create the bootable media, which should work on devices using legacy BIOS as well as on those newer machines using UEFI. How to create a USB bootable media using Rufus Alternatively, if the bootable media created using the Media Creator Tool isn't working on your computer. Or you've already downloaded the Windows 10 ISO file from another source, such as from MSDN, you can use the Rufus tool, which allows you to create a USB bootable with support for UEFI.
• Double-click the Rufus-x.xx.exe file to launch the tool. • Under 'Devices,' select the USB drive with at least 4GB of space. • Under 'Partition scheme and target system type,' select the GPT partition scheme for UEFI option from the drop-down menu. • Under 'File system' and 'Cluster size,' leave the default settings. • On 'New volume label,' type a descriptive label for the drive.
• Under 'Format Options,' check the Create a bootable disk using 'ISO image' option. • Click the drive icon. • Select the Windows 10 image. • Click Open. • Click the Start button. • Click OK to confirm that the USB drive will the erased. Once you've completed the steps, Rufus will proceed to create the USB bootable media with support for UEFI systems.
Wrapping things up After creating the bootable media with support for UEFI, you can boot your UEFI-based device with the USB flash drive to upgrade your device or perform a. More Windows 10 resources For more helpful articles, coverage, and answers to common questions about Windows 10, visit the following resources: • • •. Here is a very comprehensive procedure that I have written up that needs no additional utilities. They only exception is that if you are creating the thumb drive from Windows 7 you need a utility to mount your ISO image file. Why Use This Method?
Using this method provides several advantages over more generic methods you may have seen in the past. 1) This method will optionally hide all the Windows files so that you can easily see any additional content you place on the thumb drive without it getting lost in the clutter of all the Windows installation files. 2) This method meets all the requirements imposed by UEFI based systems which may not boot from thumb drives created via some other methods.
3) This method addresses how to properly handle thumb drives with a capacity of more than 32 GB. 4) This method provides the steps needed to ensure that you can install Windows 10 Professional on a system that was originally shipped with Windows 10 Home if you have upgraded. What You Will Need You will need a thumb drive of at least 8 GB in size and a Windows 7 or newer PC. You will also need an ISO image of Windows 10. If you use a PC with Windows 7 installed then you will need a program to mount an ISO image file.
With Windows 8+ this capability is already built into the Operating System. Preparing the Thumb Drive Insert a thumb drive of at least 8GB capacity on your system. Run 'diskpart'. Once diskpart is open run the following commands: list disk Note the disk number for the thumb drive.
It should be obvious based on the size of the disk. Select disk x (replace 'x' with the disk number for the thumb drive). Clean Note: UEFI BIOS systems may not be able to boot from a thumb drive formatted as NTFS and will require a FAT32 format. Since Windows will not allow you to format a partition larger than 32 GB to FAT32, the next command will depend upon the size of the thumb drive. If the thumb drive is 32 GB or smaller run this command: create partition primary If the thumb drive is larger than 32 GB then run this command: create partition primary size=32768 After running either of the above commands, continue with these commands: active format fs=fat32 quick assign If you see a message saying that the disk must be formatted, dismiss the message. Exit Now, mount your ISO image of Windows 10. On Windows 8 or newer, just double-click the ISO image file to do this.
Copy ALL files from the image to the thumb drive. Modification for Installing Windows 10 Professional Follow this procedure in either of the 2 cases listed below. If neither applies to you, then skip this section: 1) You have a system that did not come with an operating system installed (typical for home built PCs where you put together individual components) and you want to install Windows 10 Professional without being prompted for which edition to install.
2) You have a system from a major manufacturer such as Dell, HP, ASUS, etc. That originally shipped with Home edition but you upgraded it to Professional edition. More Information: For systems that shipped with Windows preinstalled from a major manufacturer, the BIOS of your system includes information about which version of Windows was shipped on the system. This way, when you reinstall, the same edition will automatically get installed again. However, if you upgraded, you need to follow this procedure to tell Windows to install Professional rather than home. Once the installation is completed and Windows tries to activate it will recognize that it was previously activated as a Professional edition system automatically. Create a file called ei.cfg with a text editor such as notepad.
DO NOT use programs such as Word that put special formatting characters in the file. Add the following lines to this text file: [EditionID] Professional [Channel] Retail [VL] 0 Copy this file into the sources directory on the thumb drive. OPTIONAL: Hiding Windows Files and Adding Additional Data to the Thumb Drive To hide the Windows files and just show the additional files you want to add to the thumb drive, follow these steps: 1) Open a command prompt and change to the root directory of the drive letter for the thumb drive. Run this command: attrib +s +h *.* /s /d 2) Copy any other files and folders such as the drivers for your system, Windows updates, etc. Onto the thumb drive. I recommend the Rufus method, for the simple reason that once you download an ISO, if your initial settings in Rufus don't work to boot the device, it's a simple matter to change those settings & do it again.
Why wouldn't it work? I think most all devices that run [& would run] 10 have UEFI bios, but many also have Legacy compatibility modes, so you may need the non-UEFI boot files in place. The ideal answer might be to have both types of boot files on the USB stick or drive, but that doesn't always work -- sometimes you need to eliminate one set or the other [as per Microsoft BTW]. Likewise setting the boot drive to GPT, which may or may not trigger one of the modes [e.g. Compatibility] in the bios, & may or may not work [though the Rufus setting's in the article I think will *usually* work].
The Windows To Go drives I've created, that are designed to boot on most hardware, use MBR rather than GPT, but still have a FAT32 partition holding boot files. That said, if you're upgrading builds or versions of 10, rather than installing fresh, you need the setup files from the ISO, but don't need a bootable USB stick -- just run setup from within the existing copy of 10. That eliminates the need to go into the bios to set the USB stick as 1st bootable device -- just getting into the bios may require activating a special switch on the hardware, or hitting a hot key during boot, or shift-clicking the power button on the win10 sign-in screen & selecting restart, then going through the menus to restart in the bios settings. IF you want/need something different, check out the win10 ADK [Assessment and Deployment Kit]. You can create bootable WinPE drives or optical discs or VHDs etc. You can use DISM to put the required Windows files on a drive partition -- when you start [boot] the device using that drive/partition, win10 will finish setting up, adding needed core drivers etc. Using other included tools you can customize the image that's applied using DISM, e.g.
Adding software, drivers, updates etc. You can also set up a drive [or VHD] using DISM, & create a disk image backup that can be quickly & easily restored to most drives on most hardware -- because the restore is basically a raw data copy, skipping the need to extract files from a compressed image, it can be faster. Using this stuff is also a quick & easy method of setting up 10 on a bootable USB drive or VHD -- in the case of a VHD, use EasyBCD to add it to the boot menu -- AFAIK the only real limitation is that you can't upgrade 10 builds installed to a USB drive or VHD.
How to Setup Windows 10, Windows 7, Windows 8 / 8.1, or Windows vista from USB drive? You are here: >How to setup Windows 10, Windows 7, Windows 8 / 8.1, or Windows Vista from USB drive? Step1: Create Bootable USB Drive • Start PowerISO (v6.5 or newer version, download ). • Insert the USB drive you intend to boot from.
• Choose the menu 'Tools >Create Bootable USB Drive'. The ' Create Bootable USB Drive' dialog will popup.
If you are using Windows Vista or above operating system, you need confirm the UAC dialog to continue. • In 'Create Bootable USB Drive' dialog, click '.'
Button to open the iso file of Windows operating system. • Select the correct USB drive from the 'Destination USB Drive' list if multiple USB drives are connected to the computer.
• Choose the proper writing method. 'USB-HDD' is recommended. • Click 'Start' button to start creating bootable USB drive. • PowerISO will alert you that all data on USB drive will be destroyed. Click 'OK' to continue. The program will start writing USB drive, and showing the progress information. You should get the message 'Writing USB drive completed successfully.'
After the operation completes. If no errors occurred in the above process, you should now be all set to setup Windows from USB drive! Step 2: Configuring the BIOS You should now reboot and go into the BIOS configuration to boot from USB. Instructions for doing so wildly from system to system, but generally entail the following: • Reboot the system. • While booting (before Windows starts loading), get into the BIOS configuration screen by hitting something like F1, F2, Delete or Escape. Hotkey instructions are generally provided on the screen. • Go to the section that contains your boot devices.
• With your USB drive plugged in, the USB drive should be listed. If it isn’t, your system might not support booting from USB. Assuming that it is supported (as is the case with virtually all modern hardware), promote your USB drive to the primary boot device. • Exit from the BIOS configuration, saving all changes. Please notice that you can seriously screw up your system by providing incorrect BIOS settings! Step 3: Booting and setup windows from USB drive Assuming that you properly configured your BIOS and your USB drive supports booting, Windows setup should now load.
Depending on the speed of your USB drive, this may take a while. If it isn’t working, then double-check the following before making a scene: • Is your BIOS properly configured for booting from the USB device? (Is the USB device listed and does it have top priority?) • Have you correctly prepared the USB drive in step one? (Restart the procedure.) • Does your USB drive properly support being booted from? (Try another one!) Note: The above guide works with Windows 10, Windows 7, Windows 8 / 8.1, or Windows Vista. For Windows XP with SP2 or SP3 please refer to another guide.
Copyright 2004-2017 Power Software Ltd. All rights reserved.