Hitachi Vm 500e Manual Transfer

Hitachi VM-500E and VM-500E(AV) camcorder service manual hard copy manual camcorder video. This is the original service manual for the Hitachi VM-500E and.

Digital8 camcorder. It has a DV port. You can treat this camcorder the same way you treat a miniDV tape based camcorder for transferring DV format video from the tape.

Connect the DV port on the camcorder to a firewire port on your computer using a firewire cable. If your computer does not have a firewire port, hopefully it has an expansion slot so you can add one.

Once connected, the video editor can control the camcorder. There are no device specific drivers required - the properly working firewire port has the appropriate functionality to communicate with the camcorder. Firewire, IEEE1394a, DV and i.LINK are all the same thing. Rg Mechanics Need For Speed Most Wanted Crack here. I suspect there are instructions in the manual related to connecting the camcorder 'to another i.LINK equipped device'.

Replace that VCR in the picture with a computer. Firewire ports are generally cheap to add if your computer has an expansion slot (OK, the ExpressCard expansion is a bit high, but the PCMCIA and PCI expansion cards are cheap - do not get a Dynex) - whether you need a 4-pin to 6-pin or 4-pin to 4-pin firewire cable depends on the firewire port in your computer. The Camcorder's DV port is 4-pin.